View Full Version: Rose Joints / Rod End Bearings

Dutton Forums > Phaeton S1, S2, S3, S4 > Rose Joints / Rod End Bearings


Title: Rose Joints / Rod End Bearings


mut - July 11, 2008 09:37 PM (GMT)
Hi all,

Can anybody recomend a website that sells stainless steel rose joints?

I've found them on Demon Tweeks but £70 for a 1/2" joint seems a bit steep! :o

Many Thanks,

Mick.

grimidol - July 12, 2008 08:28 AM (GMT)
have utried rallyy design http://www.rallydesign.co.uk


Andy S - July 12, 2008 09:49 AM (GMT)

Why on earth would you want stainless steel? - unless its not for a Dutton and its for a boat and you are looking at crossing an ocean....

Zinc plated will last the life of the bush - which will wear out at the same speed if the housing is Stainless or Chro-moly

The cheapest place is McGill motorsport - just dont go for the Cheap ones - go of the £7.00 ish ones

That whats on mine - in the picture of the Axle/Panhard on the B+ posts

Cheers

Andrew

mut - July 14, 2008 06:32 PM (GMT)
You have a point Andy.

Hadn't thought of it like that :rolleyes:

Mick.




Hosted for free by InvisionFree